Lory Hook
and Point Gages
For the Precision Measurements of Water Surface
Elevations
These gages have been developed from many years
of close attention to the needs of hydrographers and
hydraulic engineers. Equally useful in the field or
laboratory, they combine rugged dependability and
high precision with convenience of installation and
operation.
Finish: The mounting is finished with an
oven-baked crystal black enamel. Staff, thumb-wheel,
thumb-screws, point and hook are heavily
chromium-plated.
Lory Type A: Graduated in feet and
hundredths, with vernier reading to the thousandths
of a foot. Standard lengths are 1 ft, 1 1/2 ft., 2
ft. and 3 ft.
Lory Type B: Graduated in inches and
tenths, with vernier reading to hundredths of an
inch. Standard lengths are 1 ft., 1 1/2 ft., 2 ft.
and 3 ft.
Lory Type C: Graduated in centimeters,
millimeters, and vernier reads to a tenth of a
millimeter. Standard lengths are 30 cm, 60 cm and
100 cm.
801-210 Type A
Hook/Point 3 lbs.
801-215 Type B
Hook/Point 3 lbs.
801-220 Type C
Hook/Point 3 lbs.
Top
