Float
Tape Indicator/Index Bracket
The Float Tape Indicator, also know as an index
bracket, indicates position where stage (gage
height) is read on float tape. Comes with screws to
mount in gage house.
802-370
Float Tape Indicator
0.3 lb.
Top
Idler
Wheel
The Idler Wheel, also known as the guide pulley,
is designed to be used to offset the counter weight
, so it won't hit the float as it rises and falls in
the stilling well. It is a 2" diameter wheel for use
with the insulated and uninsulated tape drive float
wheels. Idler wheel only.
802-373
Idler Wheel 0.4 lb.
Top
Adjustable Idler
Wheel
The Adjustable Idler Wheel is designed for use
with the insulated and uninsulated tape-driven float
wheels to offset the counterweight so that it does
not hit the float as they rise and fall in the
stilling well.
802-374
Adjustable Idler Wheel
0.8 lb.
Top
End Hooks
End Hooks are used with a punched, steel float
tape or beaded cable to provide a suspension point
for the float and counterweight. Sold as a set of 2.
802-376
End Hook (set) 0.2 lb.
Top
Idler
Wheel Kit
Idler Wheel Kit is designed for use with a cable
driven float wheel to offset counterweight so that
it does not hit the float as they rise and fall in
the stilling well.
802-375
Idler Wheel Kit 0.8
lb.
Top
Stainless
Steel Counterweight
Counterweights are designed to keep tension on
the float tape or beaded cable and to maintain the
proper float depth in the water. These are stainless
steel with all stainless hardware.
802-380
85 g/3 oz. (3" float)
0.4 lb.
802-381
113 g/4 oz. (4" float)
0.4 lb.
802-383
170 g/6 oz. (5" float)
0.6 lb.
802-384
227 g/8 oz ( 6" float)
0.7 lb.
802-385
283 g/10 oz. (8" float)
0.9 lb.
802-386
340 g/12 oz. (10" float)
1 lb.
802-387
454 g/16 oz. (12" & 14" float)
1.3 lbs.
802-388
567 g/20 oz. (16" float)
1.7 lbs.
Top
Float Wheel,
for Flat Tape
These Flat Tape Float Wheels (pulleys) are
designed for standard punched tape. The metric
spacing of 12.5 cm and the English 0.2 ft and 0.5
ft. The float wheel comes in 3 options. 2 in
which will insulate encoders from lightening
strikes. Options 0 and 1 have a 5/16in
diameter center hole. Clamp is included.
- 0-Made of UV inhibited Delrin
- 1-Aluminum with Delrin Hub insert installed
- 2-Aluminum with 1/2in Diameter hole machined
802-395 Float Wheel, Flat Tape, 375mm
circ.(12.5 cm cent)
802-395-1 Float Wheel, Flat Tape, 375mm, AL
802-395-2 Float Wheel, Flat Tape, 375mm, AL, 1/2in
802-396 Float Wheel, Flat Tape, 500mm circ. (12.5 cm cent) 0.5
lb.
802-396-1 Float Wheel, Flat Tape, 500mm, AL
802-396-2 Float Wheel, Flat Tape, 500mm, AL, 1/2in
802-397
Float Wheel, Flat Tape, 12in circ. (0.2 ft./2.4"
cent )
0.3 lb.
802-397-1 Float Wheel, Flat Tape, 12in, AL
802-397-2 Float Wheel, Flat Tape, 12in, AL, 1/2in
802-398 Float
Wheel, Flat Tape, 18in circ. (0.5 ft./6" cent) 0.5 lb.
802-398-1 Float Wheel, Flat Tape, 18in, AL
802-398-2 Float Wheel, Flat Tape, 18in, AL, 1/2in
802-399 Float Wheel, Flat Tape, 750mm circ. 2.5 lbs.
802-399-1 Float Wheel, Flat Tape, 750mm, AL
802-399-2 Float Wheel, Flat Tape, 750mm, AL, 1/2in
802-400 Float Wheel, Flat Tape, 36in circ. 2.5 lbs.
802-400-1 Float Wheel, Flat Tape, 36in, AL
802-400-2 Float Wheel, Flat Tape, 36in, AL, 1/2in
Top
Float
Pulley, for Beaded Cable
The Float Pulley for Beaded Cable is aluminum
with holes spaced for 12.5 cm beaded cable for the
metric pulleys and 6" and 3" spacing for the English
pulleys. The standard pulley has a 1/2" dia hole,
but can be adapted for encoder use with the Delrin
hub insert assembly.
802-410
Float Pulley, Beaded Cbl, 375mm (12.5 cm centers)
802-412 Float Pulley, Beaded Cbl, 12in circ. (3 in. centers)
802-411 Float Pulley, Beaded Cbl, 18in circ. (6 in. centers)
802-413 Float Pulley, Beaded Cbl, 750mm circ
802-414 Float Pulley, Beaded Cbl, 36in circ.
Top
Delrin Hub Insert
Converts aluminum float wheels having a 1/2 inch
center hole to 5/16th inch and insulates shafts from
electrical surges. Hub attaches to encoder shaft
with split bolt clamp.
802-420
Delrin Hub Insert Asbly.
0.4 lb.
Top
Encoder Adapter
Sleeve
Adapts a 1/4 inch diameter shaft to a 5/16 inch
diameter shaft for float wheels.
802-425
Encoder Adapter Sleeve
0.2 lb.
Top
Float Wheel
Mounting Kit
For use with uninsulated, tape-driven, metal
float wheels having a 1/2 inch center hole. These
are typically used on a A-71 and Type F recorders or
encoders with threaded shafts.
802-430
Float Wheel Mounting Kit
0.4 lb.
Top
USGS-ADR Float
Wheel Option
- The stage kit is packaged primarily to adapt a
digital recorder for use on a 3 inch pipe well.
The kit consists of a 4 13/16 inch diameter float
wheel, 40 feet of stranded steel cable, 10 ounce
counterweight, counterweight standoff and idler
wheel, and a 2 1/2 inch polyethylene float.
- The rainfall kit is basically the same as this
stage kit, except the float wheel is 3 13/16
inches in diameter.
802-440
Float wheel, stage
0.2 lb.
802-441
Kit, stage, w/float, counterweight & cable
1.5 lbs.
802-442
Float, molded polyethylene 2 1/2 in.
0.3 lb.
802-443
Kit, rainfall, w/float, counterweight & cable
1.5 lbs.
802-444
Float wheel, rainfall
0.2 lb.
Top
Float Gage - Model 8850
