The CR510 is a low cost, versatile four channel
datalogger ideal for all types of water measurements. It
makes accurate, reliable measurements at scheduled intervals
day or night, even in harsh environments. Its low-power use
makes it well-suited for long-term, unattended operation.
Compatible water resources sensors include:
- Rainfall
- Level-stage
- Soil moisture
- Flow
- Temperature
- Turbidity
Multiple data retrieval options:
- Radio
- Phone
- Cellular phone
- Voice modem
- Satellite
- Multidrop
The CR510 can be programmed to perform special
measurement, communication, and control functions during
"storm events." It supports weir and flume equations to
calculate flow rates, and features free support software for
easy programming and on-site data collection.
The CR510's design allows seamless integration into
existing Campbell datalogger networks. Telecommunication
options include: cellular, standard, and voice-synthesized
phone modems; satellite transmitters; radios; short-haul
modems; and multidrop modems. Modbus, ALERT and Table Data
operating systems are available for the CR510.
Programming the CR510 is supported by PC200W starter
software, Short Cut and the new Logger Net 2.0 software.
The CR510 is intended for applications such as:
- Stage recording with shaft encoder, pressure
transducer or SDI-12 sensor.
- Precipitation monitoring with tipping bucket or
weighing type gage.
- Water level in irrigation systems and gate control
- Groundwater monitoring
- Air temperature and relative humidity monitoring
- Water quality recorder using water quality sensors
A CR10X is required for thermocouple measurements, or for
using multiplexers or SDM peripherals. The CR510 may be
programmed with the CR10X keyboard display unit which can
also review collected data or view real time data. A laptop
computer may also be taken to the field for these functions.
The CR510 provides precision channels that allow you to
accurately measure a variety of sensors:
- Four single-ended analog input channels
- Two pulse counting channels (an additional channel can
also be configured to count switch closures)
- Two switched excitation channels
- Two digital I/O ports (both ports support SDI-12
sensors; control port C1 also supports output control of
external devices)
- 5 and 12 VDC power terminals
- 9-pin CS I/O port
Data
and programs are stored either in non-volatile Flash memory
or battery-backed SRAM. The CR510 has two Final Storage
areas that store up to 128 K (62,000 data points).
The standard operating temperature range is -25° to +50°
C; an extended range of -55° to +85° C is available. A CR510
housed in a weather-resistant enclosure with desiccant is
protected from humidity and most contaminants and with
rechargeable power supplies, and the CR510's minimal power
requirements allow extended field use. Three year warranty
against defects in materials and workmanship.
Physical Specifications
Size: 8.4" x 1.5" x 3.9" (21.3 cm x 3.8 cm x 9.9 cm).
Additional clearance required for serial cable and sensor
leads.
Weight: 15 oz. (425 g)
805-040
CR510 Datalogger w/ 128K Memory 2.5
lbs.
805-041
Extended Temperature Testing
805-043
2 MB (1,000,000 data points) Memory
0.7 lb.
