USGS Staff Gages
Wire Weight Gages
Electric Tape Gage
Crest-Stage Gage
Lory Hook & Point Gages
Float-Type Instruments
Bubbler-Type Instruments
Sub. Pressure Transducers
Dataloggers & Accessories
Water Level Meters
Stage Sensors
Weirs and Flumes


Submersible Pressure Transducers

Submersible Pressure Transducer                   Model 3550/3555

Model 3550 Submersible Pressure Transducers are specifically designed to meet the rigorous environments encountered in ground and surface water depth measurement applications. These sensors provide repeatable, precision depth measurements under the most hostile conditions.

These transducers incorporate isolated diaphragm sensors which are specifically designed for use with hostile environments. These sensors utilize a silicon pressure cell that has been fitted into a stainless steel package with an integral, compliant stainless steel barrier diaphragm. This sensor assembly is housed in a rugged 316 SS case which provides for a variety of pressure inputs as well as electrical output connections.

Model 3550 Pressure Transducers feature high performance internal signal conditioning and accuracy is 0.10% FSO. They are available in both 4 to 20 mA and 0 to 5 Vdc output versions. Standard Cable length is 25ft.  Additional Lengths available in 25ft Increments and must be ordered with the Pressure Transducer as it is factory installed.


  • High static accuracy and repeatability
  • Welded 316 SS construction
  • Small rugged package
  • Broad selection of pressure ranges
  • 100% computer-tested, calibrated and serialized
  • Unique cable seal system
  • Fully temperature compensated
  • Available with polyurethane jacketed vented cable


Performance Pressure range: 0-300 PSIG
Thermal Error 0.05% FOS/ C
Over Pressure 3 X rated pressure
Resolution infinite
Environmental Operating Temp. Range: -20 to 60 C
Electrical Excitation: 9 to 30 Vdc
Input Current: 20 mA maximum
Output: 0-5 Vdc (3 wire) or 4-20 mA (2 wire)
Circuit Protection: Polarity, surge & shorted output
Physical Weight: 7 oz. (not including cable)
Cable: Polyurethane jacketed shielded cable with polyethylene vent tube and Kevlar tension members - 200 lbs. pull strength.
Size: .60" x 3.78" LG.

The Model 3555 has the exact same configuration and specifications as the 3550, but with decreased static accuracy of 0.25% FS.

MODEL 3550

804-050-00       3550 SPT-Range 0-3.4 ft./0-1 psi, 25ft Cable         4 lbs.

804-052-00       3550 SPT-Range 0-17 ft./0-5 psi, 25ft Cable          4 lbs.

804-053-00       3550 SPT-Range 0-34 ft./0-15 psi, 25ft Cable        4 lbs.

804-054-00       3550 SPT-Range 0-68 ft./0-30 psi, 25ft Cable        4 lbs.

MODEL 3555

804-060-00       3555 SPT-Range 0-3.4 ft./0-1 psi, 25ft Cable         4 lbs.

804-062-00       3555 SPT-Range 0-17 ft./0-5 psi, 25ft Cable          4 lbs.

804-063-00       3555 SPT-Range 0-34 ft./0-15 psi, 25ft Cable        4 lbs.

804-064-00       3555 SPT-Range 0-68 ft./0-30 psi, 25ft Cable        4 lbs.


1700 JOYCE AVENUE  COLUMBUS, OH 43219   U.S. Only: 1-800-561-9677   PHONE: 1-614-297-9877  FAX: 1-614-297-9878