Size Analyzers

[ Portable Particle Size Analyzer ] [ Visual-Accumulation Tube Sand Size Analyzer ] [ Advanced Sand Sedimentation Analyzer Visual-Accumulation Tube Sand Size Analyzer ] [ Standard Size Test Samples ] [ Scanning Photo - Sedimentograph ] [ Bottom Withdrawal Tube ] [ USGS Laboratory Analysis Forms ] [ Dabney Automated Sediment Particle Size Discriminator ]

Bottom Withdrawal Tube - Model 1011

The Bottom Withdrawal Tube method of determining particle size distribution is based on application of the Stokes Law using the Oden curve. The Bottom Withdrawal Tube consists of a transparent tube of large diameter which is open at one end and contracted at the other to a short section of small tube, on which is slipped a short piece of rubber tube which can be opened or closed with a pinch-clamp. The tube which is shown is 48 inches (1.22 meters) long with a 1" inside diameter, large enough to hold a pint (0.5 liter) sample. It is drawn down at the lower end to 1/4 inch (6.4 cm) inside diameter on which is slipped a 2" (5 cm) length of rubber tube closed by a pinch-clamp.

503-220 Bottom Withdrawal Tube 15 lbs.

503-221 BW Tube Method - Particle Size Analysis Laboratory Form (pkg. 100) 1 lb.

503-222 BW tube Method - Oden Curve Graphing Form (pkg. 100) 1 lb.