|
GAGING STATION ACCESSORIES
|
 
Electronics Tools
USGS Electronics Tool Kit
This Electronics Tool Kit was put together by HIF for
performing repair work in a quick and efficient manner.
The tools needed for common electronic repairs are
included and the kit is designed for use in the field as a
basic tool kit. The kit contains the following items
necessary for electronic repairs.
- Wire Stripper, Ideal, 10-22 AWG
- Solder Iron, Weller, 35-watt, WP35
- Solder Iron Stand, Weller, PH60
- Double Hand Holder, GC
- Screwdriver, WIHA, precision-slotted
- Wire Cutter, plier, Xcelite, 4 1/2"
- Plier, needle-nose, extra long, 6" Xcelite
- Stripper/Cutter, Jensen
- Crimping Tool, Vaco, w/bolt slicer
- Insertion Tool, Methode, HIF, black
- Solder Wick, Tech Spray, blue
- Solder, Kester Pocket Pak, 0.031
- Safety Glasses, crew, Excalibur
- Knife, heavy-duty, Xcelite
- Tool Bag, black canvas (all the tools fit in this
bag)
904-100
USGS Electronics Tool Kit 8
lbs.
Fluke Digital Multimeter
The Fluke 21 multimeter is used for electrical
troubleshooting for field personnel. The multimeter has a
three-digit LCD display and has manual selected ranges.
This particular Fluke model also has autoranging
capabilities and features a touch-hold mode and an audible
continuity tester. The multimeter can measure up to 10
amps of current and up to 600 volts and reads AC or DC on
all measurements. It has a built-in stand and comes with
red and black test probes. It is powered by a standard 9
volt alkaline battery.
904-120
Fluke Digital Multimeter 1.2
lbs.
206-022
9V Battery 0.2 lb.
Top
|
