The Universal Core Sampler takes high quality
cores of water-sediment interface. The core head
drives clear, polycarbonate barrels into sediments,
resulting in long cores with minimal effort and
sample compression. The one-way check valve permits
the barrel to free flush during deployment and also
retains the core sample without using core catchers
and nosepieces. To obtain a sample, attach a
polycarbonate core barrel to the core head and push
or lower the sampler into the sediment. If sampling
in compact deposits, use the optional slide hammer.
To adjust sampler weight, use the optional bronze
gravity weights for even easier penetration. In
shallow water (less than 20 ft.), the sampler is
manually-driven using the "T" handle and the
optional aluminum extension rods. In deeper water,
the corer is gravity/slide hammer-driven.
603-111 Universal Core Sampler 14 lbs.
603-112 24" Polycarbonate Core Barrels with End Caps
3 lbs.
603-113 48" Polycarbonate Core Barrels with End Caps
5 lbs.
603-114 Slide Hammer Assembly 16 lbs.
603-115 Gravity Weight 12 lbs.
603-116 Core Extruding Rod with Extruding Plug 5
lbs.
603-119 4 ft. Extension Rods 3 lbs.
603-120 8 ft. Extension Rods 5 lbs.
