AQUATIC SAMPLING


Swing Samplers
Subsurface Grab Samplers
Water Sampling Bottles
BOD Sampler
VOC Sampler
Bottom Grab Samplers
Core Samplers
Suction Sampler
TEF Sampler
Mod. Hesslein Sampler
Flowing Water Samplers
Aquatic Sampling Equip.
Benthic Aquatic Sampling
Artificial Substrate Samplers
Support Equipment
Electrofishing
Sampling Kits
Borger Color Chart
Armored Thermometer
Forel-Ule Color Scale
Disposable Gloves
Accessories
Embeddedness
Light Density Meters
Coolers
Aquatic Shaker Sieve
Scales
Calipers
Pebble Count Frame
Data Collection Computers
Field Books
Field Notebooks
Soil Sampling Kits
Kayaks & Pontoons



 

Artificial Substrate Samplers
[ Periphyton Samplers ] Artificial Substrate Basket ] Artificial Substrate Cone ] Riffle Rock Bags ] Collapsible-Basket Sampler ] Multiplate Hester-Dendy Sampler ]

Periphyton Samplers

This floating Artificial Substrate Sampler was developed for the EPA and other groups interested in sampling for comparative conditions of water quality.

It is placed in a stream, reservoir, or lake and is secured by means of a line and anchor (not included) attached to the Locking Rings. The lower bend in the wire frame allows for bottom anchoring and/or holding the sampler below the water surface. A deflection plate helps provide a quiet water flow area for best biotic growth and is made from a flexible water and sunlight resistant plastic.

It is left in place for two weeks during which time algae grows on the glass slides. At the end of the sampling period the slide trays are easily retrieved. The algae and other growth on the slides can then be examined for identification and counting.

Manufactured from impact resistant ABS plastic with stainless steel hardware, it will withstand the stress of attachment to anchors and buoys, a necessity for sampling of the zebra mussel. It features 20 slots that will hold up to 40 standard microscope slides (two slides in each slot). In addition, the periphyton sampler will accommodate alternative sampling media such as fibrous filter cartridges.

The periphyton sampler is available in three different configurations depending on your specific sampling needs. Slides sold separately.

Variable Depth Model - Take samples at different water depths. Sold complete with directional wind vane to position the sampler plus a stainless steel pivot pin and "S" hooks which are used to anchor the sampler onto buoys.

Floating Sampler - This sampler collects periphyton samples just below the surface of the water. The float hardware positions the sampler inconspicuously below the water's surface in an orientation that will not capsize.

Sidestream Sampler - Sold complete with suction cups that can be glued or fastened to the side of docks, buoys, or any flat surface.

604-127 Variable Depth Sampler 1.5 lbs.

604-128 Floating Model Sampler 1.5 lbs.

604-129 Sidestream Sampler 1 lb.

604-131 Slides - pack 72 1 lb.

 

 

top

1700 JOYCE AVENUE  COLUMBUS, OH 43219   U.S. Only: 1-800-561-9677   PHONE: 1-614.297.9877  FAX: 1-614.297.9878  sales@rickly.com

COPYRIGHT ©  1997-2004, RICKLY HYDROLOGICAL COMPANY.  ALL RIGHTS RESERVED