BOD
Sampler & Bottles
BOD Sampler
This water sampler is designed to properly
collect biological oxygen demand (BOD) water samples
for oxygen determination by Winkler titration or
test kit analysis. The 400 ml sample chamber
contains a 60 ml BOD bottle and is deployed in the
closed position to the specified depth. A sharp pull
on the towline dislodges two rubber stoppers
allowing water to flush through the BOD bottle while
air escapes through a port. The sampler is
retrieved, lid removed, and the water sample is
ready for oxygen determination. For rapid descent
and minimal drift in low currents, attach the 2 lb.
weight. The unit includes a clear polycarbonate and
polyethylene sample chamber, 2 lb. lead ballast
weight, 60 ml bottle, 10.0 m calibrated line with
1.0 m graduations, and nylon carrying case.
601-112
BOD Sampler 7 lbs.
Wheaton BOD Bottles
These bottles are used for incubating diluted
samples of sewage, effluents, polluted waters and
industrial wastes to determine Biological Oxygen
Demand (BOD). Available in clear borosilicate glass
or with a black coating to block light rays for the
light bottle/dark bottle method. Standard clear
bottle has white square for numbering.
601-113
Clear Glass, 60 ml Bottle 0.5 lb.
601-114
Black Coated Glass, 60 ml Bottle 0.5 lb.
