The AMS Soft Sediment Core Sampler addresses the
need for a simple device to collect undisturbed
samples of saturated sands, silts, and sediments. It
may be used directly on exposed materials at or
above the low water line or from a stable boat, pier
or platform when submerged samples are needed.
Designed for use by one or preferably two
operators, the AMS Soft Sediment Sampler will allow
collection of virtually undisturbed, profile core
samples of saturated materials from the surface or
mud water interface to depths of up to 4 feet. The
samplers are sized either 2 inches square by 2 or 4
feet long, or 3 inches square by 2 or 4 feet long.
Each sampler includes a close fitting, rectangular,
flapper valve to prevent sample loss during
recovery.
The AMS Soft Sediment Sampler comprises two right
angle shaped elongated sampler halves that lock
together, each with a pointed lower end. They are
positioned on the material to be sampled with a
guide rod and are then sequentially driven into the
material with an in-line drop hammer. A mechanism is
provided to ensure alignment of the two halves. This
process results in a high quality sample because
blocking cannot occur and compaction is minimized.
It also makes it easier to drive.
AMS Soft Sediment Sampler, complete: blade set,
primary and secondary heads, alignment block, drop
weight and 20 shear bolts.
603-093
2" x 2' Soft Sediment Corer 34 lbs.
603-094
2" x 4' Soft Sediment Corer 40 lbs.
603-095
3" x 2' Soft Sediment Corer 42 lbs.
603-096
3" x 4' Soft Sediment Corer 48 lbs.
603-097
Aluminum Guide Rod 3' 2 lbs.
603-098
Aluminum Guide Rod 5' 3 lbs.
603-099
Guide Rod Coupling 0.2 lb.
603-100
Top Loop Fitting 0.1 lb.
603-101
Nylon Rope, 25 ft. 0.5 lb.
