Model 3570 Universal Tower
- 10 ft and 20 ft. freestanding, 30 ft., Guyed
- Extra Heavy Duty 1.25 inch Steel Tubing
The 3570 Tower is designed to be guyed at 25 feet with
30 feet above the ground and three feet below the ground.
The tower has a 12 foot equilateral triangular design with
each leg of the tower made from extra heavy duty 1.25 inch
steel tubing. The cross-bracing is the "zig-zag" design
using a continuous steel rod, electrically-welded to the
side rails every 15 inches for maximum stability. The
tower contains three 10 foot sections joined by the
double-bolted technique which is proven to be unequaled in
sturdiness and dependability.
1002-135
3570 - 10 ft. Universal
80 lbs.
1002-136
3570 - 20 ft. Universal
150 lbs.
1002-137
3570 - 30 ft. Universal
230 lbs.
1002-138
Universal Tower Ground Kit
12 lbs.
1002-139
Universal Tower Guy Kit
14 lbs.
Model 3572
Tower
- Up to 20 feet (6 m) Free-Standing
- Rugged Aluminum Construction
- Sensors Mount on Top or Inside Frame for Protection
from Animals
The 3572 Tower is designed to be free-standing at 20
feet above the ground. This tower has a six-foot
equilateral triangular body with extendible legs, and is
made out of high quality aluminum pipe. In addition to its
unique body design and rugged construction, the 3572 tower
uses a wide base making it an extremely stable tower. All
sensors and equipment mount on top or inside the tower
allowing added protection from large range animals. The
tower may also be bolted down for extra stability.
1002-145
3572 - 20 ft. Semi-permanent
210 lbs.
Model
3574 Tripod
- 20 ft., Portable
- Lightweight, Adjustable
The Model 3574 portable 20 foot aluminum tower is
designed for easy handling and quick assembly. The tripod
tower is lightweight - only 66 pounds. It is equipped to
mount a full complement of sensors and the Aqualog 3100
data collection platforms. This entire portable met
station can be set up in 45 minutes. Base leg lengths are
adjustable for installations on uneven terrain.
1002-155 3574 - 20 ft Portable 80 lbs.
Model 3576 Tripod
- 6 ft., Portable
- 10 ft., Portable
- Weighs 12.5 lbs.
- Set-Up Time is 10 Minutes
The 3576 Tower is a 12.5 lb. portable tower for
temporary or quick deployment applications. This 6 or 10
foot tripod tower allows each leg to be staked to the
ground for added stability. The collapsed dimensions are
68" long with a 9" diameter.
1002-165 3576 - 6 ft. (2 m) Tripod 15 lbs.
1002-168 3576 - 10 ft. (3 m) Tripod 18 lbs.
Model 3578 Standpipe
- 10 ft. (3 m) Standpipe
- Protects Sensitive Electrical Equipment
The Model 3578 Standpipe Tower is a 10 foot aluminum
tower for use with the ALERT Flood Warning System or
Aquamet 3500 Weather Station. Simple and strong, the 12
inch diameter pipe offers little wind resistance and
serves as protection to electrically sensitive system
components. Additionally, the 3578 provides elevation for
a system antenna, tipping bucket and other sensor options
keeping the equipment out of reach of vandals and animals
as well as providing increased measurement accuracy. The
bulk of the tower is empty and random gunshots are not
likely to cause serious damage.
The standpipe is installed vertically in a prepared
hole approximately two feet below the ground level.
Concrete is required around the base of the tower only if
the soil is loose or sandy. When no concrete is used, the
hole should be narrower to minimize the amount of
disturbed soil at the sides of the tower. Equipment can be
installed before or after the standpipe is erected.
1002-175 3578 - Standpipe 65 lbs.
Top
